Explore Technologies

• Standard sensors for detecting ferrous metals
• Wide array of variations. Ideal for a variety of applications
• Models with different frequencies are also available to prevent mutual interference
• Superior environment resistance with standard cable made of oil resistant PVC and sensing surface made of material that resists cutting oil
• Useful to help prevent disconnection
• Cable protector provided as a standard feature

Additional Information:

• Item Code: E2E-X7D1-N 2M OMS

A proximity sensor is a sensor able to detect the presence of nearby objects without any physical contact.

Proximity Sensors
Threaded, Cylindrical Sensor Detects Metallic and Non-metallic Objects This Sensor Having Following Features.

• Permits non-contact detection of metallic and non-metallic objects such as glass, wood, water, oil and plastic
• Allows indirect detection of materials inside non-metallic containers
• Built-in amplifier accepts a wide range of supply voltages and switches up to 200 mA
• LED indicator and fixed sensitivity for simple installation

 Effects Of Surrounding Metal
When mounting the proximity sensor in or near a metallic panel, be sure to provide a minimum distance as shown in the tables below. This prevents the sensor from being affected by metallic objects other than the target.

DC Switching Sensors
In applying any of the E2K-XME series proximity sensors as a voltage output type, note that an unwanted output may be produced momentarily (50 ms max.) when power is applied with a target moving toward the E2K-XME1(F1) or with a target moving away from the E2K-XME2(F2). After the power application, a minimum of 50 ms is required before the sensor circuit can operate. Move the target toward or away from the proximity sensor after this time period.

AC Switching Sensors
After applying power to a proximity sensor, a minimum of 100 ms is required before the sensor circuit reaches its steady state. The load is in the OFF state during this period. Do not move the target toward or away from the proximity sensor until the sensor circuit enters the steady state. The operation indicator (LED) will illuminate momentarily when the power is turned ON or OFF, but the output stage circuit is in a normal operating state.

 Using Metal Conduit
If a high voltage or power line runs near the proximity sensor cable, be sure to wire the sensor cable through a metal conduit to protect the sensor from malfunctioning or damage.

 Surge Protection
The proximity sensor is provided with a surge suppressor circuit. However, if any large surge generation source (i.e. motor, welding machine, etc.) exists in the vicinity of the proximity sensor, insert a surge suppressor (such as a varistor) into the surge generating source.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK

Established in the year 2005, "Explore Technologies” is a leading Wholesale Trader, offering a superior quality range of Automation System, Photoelectric Sensor, Industrial Safety Components, Control Gear and much more to our clients. The products we offer are available at the most affordable rates to our clients. Our customer-centric business policies have helped us to enjoy a favorable market presence for offering these products. The rapid growth of our company is fueled by positive clients’ feedback which we have achieved from satisfied clients.

E2E Small Diameter Proximity Sensors The E2E inductive proximity sensors are extremely small in diameter with 3mm, 4mm, 6.5 mm, M4 and M5 versions available. The stable long sensing distance of these sensors enables high performance for detection of ferrous metal even when the work flow is unsteady. The E2E series of proximity sensors have 4 indicator lamps on them in a 360 ° layout making it extremely easy to check the operation status. High speed response enables sharp detection timing, 5 kHz max Load short-circuit protection and output reverse polarity protection Easy installation LED indication Omron E2 Series E2 Sensors The Omron E2 & E3 range of sensors enables an extended sensing range, which provides greater sensitivity and mechanical protection. All have normally open output configuration and are flush mountable.

Additional Information:

• Item Code: E2E-C04S12-WC-C1

Reflector, For Use With Retroreflective Sensors

18 mm cylindrical photoelectric sensor, wide operating voltage 10-30 VDC or 24-240 VAC, Light-ON/Dark-ON operation, NPN or PNP models, plastic (ABS) housing - rugged stainless steel or nickel-plated brass versions available, 2 m prewired cable.

Additional Information:

• Item Code: E39-R1

Omron E2B cylindrical proximity sensor has a 4 mm inductive sensing with PNP output and NO contact Embody two seemingly contradictory characteristics: value-for money and high reliability Double sensing distances With an all-round 360 deg visible indicator Short barrel length Standard sensing object - 12 x 12 x 1 mm iron Yellow LED operation indicator Download Data Sheet

Additional Information:

• Item Code: E2B-M12KS04-M1-B1

Established in the year 2005, "Explore Technologies” is a leading Wholesale Trader, offering a superior quality range of Automation System, Photoelectric Sensor, Industrial Safety Components, Control Gear and much more to our clients. The products we offer are available at the most affordable rates to our clients. Our customer-centric business policies have helped us to enjoy a favorable market presence for offering these products. The rapid growth of our company is fueled by positive clients’ feedback which we have achieved from satisfied clients.

Additional Information:

• Item Code: E2A-M12KN08-WP-C1

The E2A-M12KS04-WP-D1 2M OMC from Omron Industrial Automation is an E2A series cylindrical proximity sensor. It has a safe mounting with greater sensing distance approximately 1.5 to 2 times larger than that of any conventional Omron sensor. This cylindrical proximity sensor uses high-frequency oscillations. It resists heat, chemicals and water better than rectangular sensors.

Additional Information:

• Item Code: E2A-M12KS04-WP-D1

E2EX Shielded DC 3-wire Sensors

Omron E2EX series inductive proximity sensors for detecting ferrous metals.

PBT sensing face material
LED indication
3 wire DC
Shielded

Additional Information:

• Item Code: E2E-X10ME1

E3JK Photoelectric Senors with Built-in Power Supply The E3JK series of photoelectric sensors from Omron have a built in power supply. This series of photoelectric sensors have a high power and visible red LED for all models enabling easy alignment and long sensing distance.

Additional Information:

• Item Code: E3JK-RR11 2M

General Purpose Incremental Encoders Incremental Encoders output a pulse string according to the rotational displacement of an axis. The number of rotations can be detected by counting the number of pulses. Improved reliability with reverse connection and load shortcircuit protection.

Additional Information:

• Item Code: E6B2-CWZ6C 1000P/R 2M

Additional Information:

• Item Code: E2E-C04S12-WC-B1

E6B2 Incremental Rotary Encoder General purpose incremental rotary encoders for use in positioning applications Easy to adjust zero index (phase Z) with origin indicating function Rugged construction.

Additional Information:

• Item Code: E6B2-CWZ6C
• Production Capacity: 500
• Delivery Time: 1 WEEK

Established in the year 2005, "Explore Technologies” is a leading Wholesale Trader, offering a superior quality range of Automation System, Photoelectric Sensor, Industrial Safety Components, Control Gear and much more to our clients. The products we offer are available at the most affordable rates to our clients. Our customer-centric business policies have helped us to enjoy a favorable market presence for offering these products. The rapid growth of our company is fueled by positive clients’ feedback which we have achieved from satisfied clients.

Additional Information:

• Item Code: E6C2-CWZ6C

The E3RA range of radial photoelectric sensors from Omron are simple and quick to mount and easy to set up due to the large adjuster and high power LED indicator making alignment easier. The status LED indicators of these photoelectric sensors can also be seen easily, from long distances and wide angles. The E3RA series sensors are typically installed in industrial plants such as food and beverage, textiles, food and logistics and are also designed especially for non stop detection for areas where machines never stop.

Additional Information:

• Item Code: E3RA-DP22

The E3T-SL11 is an ultra compact ultrathin Photoelectric Sensor with built-in amplifier. The improved E3T series with easier, smoother mounting and installation. It features M2-mounting screw. It has 650nm red LED light source. It provides power supply and control output reverse polarity protection, output short-circuit protection and mutual interference prevention.

Additional Information:

• Item Code: E3T-SL11

The E3FA / E3FB series is a new generation of Omron photoelectric sensors, incorporating a variety of reliable and easy-to-use photoelectric sensors.Thanks to a wealth of traditional and special features, the product line can be used in many industries, ranging from packaging industry to ceramic industry to material handling.

Additional Information:

• Item Code: E3FA-RP11

Omron XS2 Straight cable connector features a 22 AWG conductor with 2 m long cord and has a M12 socket end style

Additional Information:

• Item Code: XS2F-M12PVC3S2M
• Production Capacity: 100
• Delivery Time: 1 WEEK

The EE-SX67 series from Omron are slot type photomicrosensor with connector or prewired models. This photomicrosensor operates with 50mA to 100mA direct switching capacity for built-in application.

Additional Information:

• Item Code: EE-SX671

Photoelectric Sensors detect photo-optical workpieces. OMRON provides many varieties of Sensor, including diffuse-reflective, through-beam, retro-reflective, and distance-settable Sensors, as well as Sensors with either built-in or separate amplifiers and Fiber Units.

Additional Information:

• Item Code: E3Z-D61

Mechanical axis and optical axis offset of less than +-2.5 simplifies optical axis adjustment. Insulation resistace 20 M min. at 500 VDC. Ambident illumintion (receiver side) Incandescent lamp 3,000 lx max. High stability with unique algorithm that prevents interference of external light. Model No. E3Z-D82 2M OMS Type of Product Photo Sensor Sub Type Diffuse Type Rated Voltage (V) 12 - 24 VDC LED Type Infrared LED Sensing Range 1 Mtr Wavelength(nm) 860 nm Current Consumption 30 mA Operation Mode dark on Operating Temperature ( DegreeC) -25 to 55 DegreeC Ambient Humidity (%) 35 to 85% Dielectric Strenght 1000 VAC, 50/60 Hz for 1 min. Lens Type Methacrylic resin Protection Class IP64 Frequency(Hz) 50/60 Hz Response Time (ms) 1 ms Material PBT (polybutylene terephthalate) Application Used for light detection purpose in Nuclear energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles,safety equipment, and installations. Feature Highly Visible indicator.

Additional Information:

• Item Code: E3JM-DS70M4T-G
• Production Capacity: 100
• Delivery Time: 1

The E3X-HD11 2M is a Smart Fiber Sensor with NPN output. Surprisingly stable detection with finger tip. Exceptionally easy operation and stabilizing technology. Smart power control function detects the decrease in light intensity due to LED aged deterioration and the decrease in incident level due to dirt and then automatically compensates the optimum detection condition. Lighting element GIGA RAY II is equipped that margin of detection on all scenes has been realized. Unparalleled power of GIGA RAY II, with the highest level stably detects large work pieces and low-reflective work pieces such as black rubber whose detection was unstable before. Maintenance-free operation by double compensation of light intensity and incident level Detect work pieces compensation without concern for color and size Greatly reduce wiring work for fiber amplifiers with zero-line connection Easy and optimum settings for anyone Contribute to energy saving of equipment

Additional Information:

• Item Code: E3X-HD11

The E3Z-LS range of photoelectric sensors are compact in design with a built in amplifier. E3Z-LS distance settable sensors are unaffected by colour or background whilst able to detect minute steps.

Simple positioning settings using a clear LED spot
Distance setting by 5 turn endless adjuster
Load power supply voltage: 26.4 Vdc max
Load current: 100 mA max
Open collector output
Reversed power supply polarity protection, Output short-circuit protection, Mutual interference prevention
IP67 rated

Additional Information:

• Item Code: E3Z-LS61

EE-SX670P 392308 EESX2249C OMRON Photoelectric sensor

Additional Information:

• Item Code: EESX2249C

Additional Information:

• Item Code: EE-SX673

Additional Information:

• Item Code: EE-SX670A

The EE-SX672 is a non-modulated Slot-type Photomicrosensor with polybutylene phthalate (PBT) case and polycarbonate cover, emitter/receiver. It include model that enable switching between dark-ON and light-ON operation. Flexible robot cable is provided as a standard feature.

Additional Information:

• Item Code: EE-SX672

High resolution with a 0.5-mm-wide sensing aperture. Dark ON model (EE-SX3081) Light ON model ... Electrical and Optical Characteristics (Ta = 25ºC) ...

Additional Information:

• Item Code: EE-SG3
• Production Capacity: 100
• Delivery Time: 1 WEEK

Fibre optic sensor, thru-beam, M3 head, robot application, break resistant fibre R4, 2m cable The standard cylindrical fiber optic sensing heads provide reliable object detection, easy installation and long sensor lifetime for all general applications. High-flex fibers and 90° cable exit for cable breakage prevention. Models with hexagonal back for simplified one-nut mounting.

Additional Information:

• Item Code: E32-T21
• Production Capacity: 100
• Delivery Time: 1 wek

Omron Sensor that detect the presence of operators near hazardous machines of facilitates.

Omron Safety Sensors
There are some Safety Standards and Precautions DO NOT use this Protective Light Curtain where a risk assessment has determined that control reliability is required, such as for hazardous machinery. Use only for equipment where the worstcase injury from an accident can be remedied by simple first aid, as determined by a thorough risk assessment. This protective device meets the Type 2 requirements of IEC 61496. It DOES NOT meet U.S. OSHA 1910.217, ANSI B11, or ANSI/RIA R15.06 requirements.
Some Functional And Operational Area of our sites is as follows:------

EXTERNAL DIAGNOSTIC INPUT FUNCTION
The MiniProtect MP2100 should only be used on machinery that can consistently and immediately stop anywhere in its cycle or stroke. Never use a MiniProtect MP2100 on a full revolution clutched power press or machine. If the light curtain does not protect all access to the point of operation, the unprotected access must be guarded by other appropriate devices such as mechanical guards.

Additional Information:

• Item Code: EE-SPY411