Explore Technologies

The CJ1W-TS561 is a 6-channel input unit for K-type and J-type thermocouples. It can be installed in any CJ1-series PLC system. It is classified as a basic I/O unit, occupying 48, 64 or 96 I/O points, depending on the number of activated inputs. Always verify that the maximum I/O capacity of the CJ1 CPU is sufficient for the number of required I/O points. 

Additional Information:

• Item Code: CJ1W-TS561

General Purpose:
Our General-purpose Controllers meet a wide range of applications needs for food processing machines, packaging machines, extruders, semiconductor production equipment, and many other areas with high speed, high performance, easy settings, and easy-to-read desplays.

Economy Type
These are relatively simple in functions and economic Temperature Controller. They can also be used for temperature alarm application.

Module Type
Module Type

PLC Unit Type
Temperature control unit of PLC. At most 4 points of temperature control is possible by 1 unit.

Support S/W
The Support Software is an application software for Temperature Controller to set its parameters and monitor temperature.

Input Equipments
Temperature Sensors and Temperature/Humidity Sensors for Temperature Controllers are available for various applications.

Related Equipments
USB-Serial Conversion Cable is also available to connect to Temperature Controllers. .

These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flowrate control. OMRON also provides temperature and humidity sensors.

Additional Information:

• Item Code: E5CSV

General Purpose:
Our General-purpose Controllers meet a wide range of applications needs for food processing machines, packaging machines, extruders, semiconductor production equipment, and many other areas with high speed, high performance, easy settings, and easy-to-read desplays.

Economy Type
These are relatively simple in functions and economic Temperature Controller. They can also be used for temperature alarm application.

Module Type
Module Type

PLC Unit Type
Temperature control unit of PLC. At most 4 points of temperature control is possible by 1 unit. about

Support S/W
The Support Software is an application software for Temperature Controller to set its parameters and monitor temperature.

Input Equipments
Temperature Sensors and Temperature/Humidity Sensors for Temperature Controllers are available for various applications.

Related Equipments
USB-Serial Conversion Cable is also available to connect to Temperature Controllers.

These Controllers receive sensor signals and control heaters or other devices to maintain a preset temperature. They can also be used for humidity, pressure, and flowrate control. OMRON also provides temperature and humidity sensors.

Additional Information:

• Item Code: E5CD
• Production Capacity: 10
• Delivery Time: 4-5 WORKING DAYS
• Packaging Details: BY COURIER

Digital Timers provide high-precision operation time settings. Digital switches enable easy preset time settings.

Basic Features:

• Better Readability:-Character Height of 10 mm with a Wide Viewing Angle.
• The Easiest Operation:-Operation is simplified by the Up/Down Keys for each digit on 4-digit.
• Safety and Reliability:-Isolated Power Supply and Input Circuits Power supply circuit and input circuits are isolated for safety and reliability. Previous non-isolated timers had wiring restrictions and could be damaged if wired incorrectly. The H5CZ removes these worries. * H5CZ with 100 to 240-VAC specifications.
• Set Value Limit:-You can set an upper limit for the set value to prevent unexpected operation of output devices caused by setting mistakes.
• Output Counter:-The output counter counts the number of times the output turns ON (alarm display, count monitoring, count in increments of 1,000). This counter is useful in managing the service life of the Timer or the load.

Additional Information:

• Production Capacity: 3A
• Delivery Time: 1 WEEK

Counters & Tachometers TOTALISER 8 DIGIT MAX SCAN 20Hz,Large totaliser display
Self powered by internal battery which can also be replaced
Key protected switch to prevent accidental reset switch operation
Dual operation mode
Short body of only 48.5mm
Finger touch protectionOmron Digital Counter

The Omron H7EC series 8-digit LCD display, panel mount, self-powered totalizer counter is compact in size. It is a cost-efficient totalizer with high visibility available with backlit LCD display.
It has a maximum count frequency is 1KHz.

Features and Benefits

• Black and light grey cases available
• PNP/NPN universal DC voltage input types now available
• Battery is replaceable for Totalizer reuse and conservation of the environment
• Key-protect switch to prevent faulty reset key operation
• Dual operation mode
• Plug-in screw terminals
• Operating temperature ranges between -10°C and 55°C

Applications

Industrial counting applications
• Control and monitoring systems
• Manufacturing assembly lines
All units are resettable. Panel cut out is 22 x 45 with the front fascia sealed to IP65 and has an operating temperature range of -10 to +55°C

Additional Information:

• Production Capacity: 100

Digital counters are electronic devices that perform a variety of counting functions.

There are different types of products.

• Digital Counter H7CZ
• Multifunction Counter (DIN 72 × 72) H7BX
• Multifunction Preset Counter H7CX-A
• Tachometer H7CX-R
• Preset Counter/Timer (48 × 24) H8GN
• Digital Counter (DIN 72 × 72) H7AN
• Solid-state Counter H7CN

Preset Counters turn ON/OFF control outputs when the present value reach the preset value. Easy-to-read LCD/LED displays are provided. Preset Counters with tachometer functions and communications are also available.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 WEEK

Analog dial set multi-function, multi-range Omron Timer cover 18 different operating modes and include true power off-delay, star-delta, and cyclic twin timers.

There are different types of products.

• Multi-range, Multi-mode Timer H3DK-M / -S
• Twin Timer H3DK-F
• Star-delta Timer H3DK-G
• Power OFF-delay Timer H3DK-H
• Solid-state Multi-functional Timers H3CR-A
• Solid-state Timer H3CR-H
• Solid-state Timer H3M
• Solid-state Timer H3Y
• Solid-state Timer H3YN
• Solid-state Timer H3RN
• Mechatronic Analog Timer H3AM
• Solid-state Timer H3DS

Multiple time ranges and operating modes let you cover a wide range of applications. The time-limit DPDT output contacts can be changed to time-limit SPDT and instantaneous SPDT output contacts using a switch. Sequence checks are easily performed by setting an instantaneous output to 0. Start signal control for the H3DK-M

Additional Information:

• Production Capacity: 500
• Delivery Time: 1 WEEK